Products

We offer DIY LED kits that you can install onto any aircraft. Simply order the LED strips in the length that you need for your airframe, add any extensions or Y connectors needed, add the LED controller, and you’re all set. Once you receive everything, you can cut the LED strips to the correct length and install them using the adhesive backing, or use hot glue or other adhesives in harder areas. They can be installed on the surface of the airframe, or they can be installed inside the airframe, as long as your airframe allows the light to show through. Use our firmware configuration tool to program the controller with the correct numbers of LEDs in each strip, and you’re all set for some fun night flying!

Keep in mind that adding Y connectors will double the current draw for that leg of the LED controller. Y connectors should only be used on short sections of LEDs, NOT for long wing strips. Our firmware configuration tool calculates maximum current draw based on the number of LEDs that you program into each leg, and adjusts the maximum brightness accordingly. But when adding strips through Y connectors, the additional LEDs are not taken into consideration. When laying out your design, please connect everything on your workbench first and power it up using a watt meter to check your current draw. Make sure you are under the limits of your BEC. If necessary, use a secondary BEC to power the LED controller.

 

Complete Replacement LED strip kit for the Night Raidan

Complete Replacement LED strip kit for the Night Raidan

$40.00

Are the LED strips in your Night Radian failing or not lighting correctly? This kit contains all the LED strips needed to replace everything in your Night Radian. This kit also includes the extensions and Y connectors needed for the tail and the nose.

Quantity:
Add To Cart